Current locationHome >  >Products >Subsidiary

Cyclone Dust Collector

Production capacity
1-20 t/h
Raw material dealing
dust, powder
Applicated range
fertilizer, metallurgy, mining, chemical industry, etc.
Service support
Word specification (click download)Pdf specification (click download)

Leave Message

Product presentation

 Cyclone Separator are ideal for separating dust with particle size greater than 5 um. Cyclone Separator provides a very cost effective solution to the problems of dust collection, materials and for conveying bark and chips. Cyclone Separator unit basically consists of a cylindrical and a conical portion. As the dust leaden air enters the inlet port, it spirals downwards in an outer vortex and comes out of the unit in an inner vortex. It uses centrifugal force for the separation of particles. Centrifugal action causes the air material to move around the inside walls of the cyclone, from where the material drops by force of gravity at the bottom leaving the air to escape through the top.

Performance features

1. Easy operation maintenance.Single baghouse . 

2. Assembled when EX work from our factory and no more  intallation work needed.

3. High filtration efficiency up to 99.99% , low  emission < 30 mg/ M3.

4. Energy saving 

5. Lower system resistance up to < 1000 pa.


Working principle

Cyclone dust collector is composed of intake pipe, exhaust pipe, cylinder, cone and ash bucket. Cyclone dust collector is simple, easy to manufacture, installation and maintenance management, equipment investment and operating costs are low, has been widely used in separation of solid and liquid particles from the air, or from the liquid separation of solid particles. Under normal operating conditions, the centrifugal force acting on the particles is 5 to 2,500 times the gravity, so the efficiency of the cyclone is significantly higher than that of the gravity settling chamber. The use of this principle based on the successful development of a dust removal efficiency of more than ninety percent of the cyclone dust removal device. In the mechanical dust collector, the cyclone dust collector is the most efficient one. It is suitable for the removal of non-viscous and non-fibrous dust, mostly used to remove more than 5m particles, parallel multi-cyclone device for 3m particles also have 80 ~ 85% of the dust removal efficiency. Selection of high temperature, wear and corrosion resistance of the special metal or ceramic materials constructed cyclone dust collector, can be as high as 1000 , the pressure of 500 105Pa under the conditions of operation. From the technical and economic aspects of the cyclone dust collector pressure loss control range is generally 500 ~ 2000Pa. Therefore, it belongs to the effect of dust, and can be used for high temperature flue gas purification, is widely used as a dust collector, and more used in boiler flue dust, multi-stage dust and pre-dust. Its main drawback is the small dust particles (<5m) removal efficiency is low.

Technical parameter

Model

Air Volumem3/h

ResistancePa

Inlet Air Speedm/s

Overall Size

Weightkg

XP-200

370590

8002160

1422

200940

37

XP-300

8401320

8002160

1422

3001360

54

XP-400

15002340

8002160

1422

4001780

85

XP-500

23403660

8002160

1422

5002200

132

XP-600

33705290

8002160

1422

6002620

183

XP-700

46007200

8002160

1422

7003030

252

 XP-800

59509350 

8002160

1422 

 8003450

 325

XP-900

765011890

8002160

1422

9003870

400

XP-1000 

 934014630

8002160 

1422 

10004280

 500


Related devices

Online Message

Contact

Machinery & Equipment

Scanning mobile station
About us
Company profile
Patent
Enterprise culture
Company strength
Factory photo
Contact us
Products
Granulating
Crushing
Drying/cooling
Mixing
Fermentation
Subsidiary
Production Line
News&Events
Company Trends
Industry news
Technical literature
Project case
Solutions