¡¡
Current location£ºHome >  >Products >Drying/cooling

Deodorization tower

Production capacity£º
20,000 m3
Raw material dealing£º
waste powder
Applicated range£º
Organic waste gas, industrial dust
Service support£º
Word specification (click download)Pdf specification (click download)

Leave Message

Product presentation

1. Adjustment of circulating water volume: It is determined by the spray tower water supply pump. When one boiler is operated, one unit can be opened. When two or three units are operated at the same time, both pumps are opened, and the mud pump is driven. It should be adjusted according to the flow rate of the circulation pump to make them equal.

2. Dosing amount in the dosing tank in the spray tower: When running a boiler, add 2 bags of alkali and add 5 bags of slaked lime. If two or three sets are run in winter, the dosage can be increased according to the corresponding multiple.

3 The spray tower sedimentation tank should be cleaned frequently, cleaned once a week in the summer and cleaned once every three days in the winter.

4. When the gray water separator discharges, discharge once every shift, and open the drain valve separately until there is clear water.

5. All the above rotating parts should be inspected and oiled frequently, and the faults should be eliminated in time to ensure the desulfurization effect of the spray tower.

6. Pay attention to safety when adding medicine to the upper and lower stairs. Have independent security and mutual security awareness.

7, the work should be completed in a timely manner to clean up the health, so that people go to the venue clear.


Performance features

1. High efficiency of dust removal and desulfurization, when using alkaline washing water, the desulfurization efficiency can reach 95%;

2. The equipment occupies less space and is easy to install;

3. Low water consumption and power consumption indicators;

4. Corrosion resistance, no wear and long service life;

5. The equipment is reliable in operation and easy to maintain.

Working principle

The acid mist exhaust gas is introduced into the purification tower by the air duct, and passes through the packing layer. The exhaust gas and the sodium hydroxide absorption liquid are fully contacted by the gas-liquid two-phase to absorb the neutralization reaction, and the acid mist exhaust gas is purified, and then dehydrated and defogged by the defogging plate. The fan is discharged into the atmosphere. After the bottom of the tower is pressurized by the water pump, the absorption liquid is sprayed on the top of the tower, and then returned to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards in Guangdong Province and is lower than the emission standard.

Technical parameter

The packing layer in the spray tower serves as a mass transfer device for the gas-liquid two-phase contact member. The bottom of the packed tower is provided with a packing support plate, and the packing is placed on the support plate in a random manner. Install a packing platen above the packing to prevent it from being blown by the updraft. The spray tower spray is sprayed from the top of the tower through the liquid distributor onto the packing and flows down the surface of the packing. The gas is fed from the bottom of the tower, distributed through the gas distribution device, and continuously flows through the gap of the packing layer in a countercurrent flow with the liquid. On the surface of the packing, the gas-liquid two phases are in close contact with each other for mass transfer. When the liquid flows down the packing layer, a wall flow phenomenon sometimes occurs, and the wall flow effect causes the gas-liquid two phases to be unevenly distributed in the packing layer, thereby lowering the mass transfer efficiency. Therefore, the packing layer in the spray tower is divided into two sections, and a redistribution device is arranged in the middle, and after being redistributed, it is sprayed onto the lower layer filler.

Related devices

Online Message

Contact

Machinery & Equipment

Scanning mobile station
About us
Company profile
Patent
Enterprise culture
Company strength
Factory photo
Contact us
Products
Granulating
Crushing
Drying/cooling
Mixing
Fermentation
Subsidiary
Production Line
News&Events
Company Trends
Industry news
Technical literature
Project case
Solutions